Multi-Mount Wriststrap Monitor #19651 / 19336-XF

Description

Item 19651 has been discontinued and replaced by the item(s) below: 19336-XF

19336-XF Multi-Mount Continuous Monitor w/North American Plug

Single Workstation Continuous Monitor
Continuously monitors the path-to-ground integrity of one operator and one ESD worksurface
NEW Park Delay Timer and ParkSnap™
Indicates the 8 second delay to disconnect and park the operator wrist cord without creating a false alarm
NEW Light Tower Compatibility
Connects with the 19332 Light Tower accessory
Wave Distortion Technology
Provides stable continuous monitoring (versus pulsed or intermittent) of the wrist strap’s path-to-ground* and the presence of its 1 megohm safety resistor
Mat Monitor Switch
Disables the worksurface monitor circuit when used in areas where there is no ESD worksurface
Audible Alarm Adjustment
Sets the audible alarm volume from loud to louder
Enclosure with Mounting Tabs
Installs in workbench and equipment environments
Single-Wire Impedance Design
Meets ANSI/ESD S20.20 in accordance with ESD TR1.0-01-0
1.2 Volt Operator Test Voltage
Reduces the risk of electrical overstress (EOS) for the handling of sensitive components
<50 Millisecond Alarm Response Time
Identifies failures and intermittencies
Calibration Verification
Use the Desco 98221 Wave Distortion Monitor Verification Tester to check the test limits of Wave Distortion Monitors without removing them from their workstations
NIST Calibrated – Original Calibration Certificate can be Downloaded
Calibrated with accepted procedures and standards traceable to the National Institute of Standards and Technology.
100-240VAC Safety Certified Power Adapter with North American Plug
Works with standard electrical systems in North America, Japan, and Asia
Made in the United States of America

*The ESDA Wrist Strap standard is ANSI/ESD S1.1. The Wrist Strap System required limit per ANSI/ESD S20.20 Table 3 is 0.8 to 1.2 x 106 ohms with product qualification testing per ANSI/ESD S1.1. The test range of the monitored circuit is 500 kilohms to 10 megohms.